|
|
|
High-Speed Automated Programming System AH-200
|
|
AH-200
*Throughput: 1300UPH
*Programming site: 4sets x 2sets=8sites
*Devices supported: EPROM, EEPROM, FLASH, MCU
*Applicable packages: SOP, SSOP, SON, PLCC-20, PLCC-28, PLCC-32, PLCC-44
*Tube-in: 150mil, 208mil, 300mil, PLCC20, PLCC28, PLCC32, PLCC44
*Package available: 30 tubes auto each package
*Tube-out: 150mil, 208mil, 300mil, PLCC20, PLCC28, PLCC32, PLCC44
*Package available: 30 tubes auto each package
*Tape-in: Available for tape with 12~ 34mm tape width
*Tape-out: Press-sealing mode. Accept tape with 12~ 24mm |
| |
|
|
|
|
|
| |
High-Speed Automated Programming System AH-400
|
|
AH-400
*Throughput: 1500UPH
*Programming site: 4sets x 2sets=8sites
*Devices supported: EPROM, EEPROM, FLASH, MCU
*Applicable packages: SOP, SSOP, SON,TSSOP, MLP, QFN, PLCC-20, PLCC-28, PLCC-32
*Tube-in: 150mil, 207mil, 300mil, 330mil, PLCC20, PLCC28, PLCC32, PLCC44
*Package available: 30 tubes auto each package
*Tube-out: 150mil, 207mil, 300mil, 330mil, PLCC20, PLCC28, PLCC32, PLCC44
*Package available: 30 tubes auto each package
*Tape-in: Available for tape with 12~ 24mm tape width
*Tape-out: Press-sealing mode. Accept tape with 12~ 24mm |
| |
|
|
|
|
|
| |
| |
Automated Device Testing/ Programming System AH-600 |
|
AH-600
*Throughput: 2400UPH
* Pick and Place method ¡J 4 vacuum nozzles
Component detection ¡J Photoelectric Sensor
Dimensions ¡J 726¡Ñ622¡Ñ1180 ¡] W/D/H ¡^ mm
Add loading and unloading system Dimensions ¡J
Net weight ¡J 180kg
* Component Holder System
Holder Dimensions ¡J £X 61mm
5 Operating position ¡J Pick ¡B Place ¡B Detection ¡B Programming ¡B Verification
* Operating Requirements
Input voltage ¡J AC200~245V ¡A single-phase ¡A 3-wires
Input line frequency ¡J 50/60Hz
Power consumption ¡J 1.5KVA
Air pressure ¡J 0.6MPa ¡] 5.5~ 6.0kg /cm2 ¡^
Air flow ¡J 32liter/min |
| |
|
|
|
|
|
| |
Universal Automated Programming System APE-3200A |
|
APE-3200A
*Throughput: 1000UPH
*Programming site: 1sets~8sets, 4 socket per set up to 32 socket
*Tray in: Auto tray move in, stack up to 10-12 trays for JEDEC standard.
*Tray out: Auto tray move out, stack up to 10-12 trays for JEDEC standard.
*Tube-in: Support 150mil, 207mil, 300mil, SOP and PLCC packages.
*Tube-out: Support 150mil, 207mil, 300mil, SOP and PLCC packages
*Tape-in: Available for tape with 8mm, 12mm, 16mm, 20mm, 24mm, 34mm, tape width.
*Tape-out: Accept tape with 8mm~ 34mm tape width. |
| |
|
|
|
|
|
| |
|
|
