AH-280 Automated Universal Programmer
Low-Cost Automated Device Programming System
Introduction
AH-280 Automated Device Programming System is specifically designed for the requirements of minimum cost with the highest throughput at 3000 units per hour. Its patent rotary arm and customizable mobile platform offer the highest mechanical speed while remaining flexible for integrating various modules including vision inspection systems.
The universal programming system supports SPI, Nand, Nor flash, MCU, MCP, Microcontroller, eMMC, SRAM, eeprom, PLD…etc. in reel/tape packing.
l Highest Cost-Effectiveness
AH-280 universal programmer utilizes advanced and patent rotary arm design offering a fully automated system of high efficiency and precision with a rather low cost, beating any other programming equipment on the global market.
l Upgraded Robotic Arms
AH-280 universal programming system offers an upgraded rotary robotic arm and two horizontal arms with four vertical axes equipped with specially designed nozzles at both ends for device pick & place. The repeatability is ensured by the precise motors of each axis.
l Universal IC Programmers
The built-in 6-12 units of Leaptronix ultra speed universal programmers provide a wide range of supported devices including SPI, Nand, Nor flash, MCU, MCP, Microcontroller, eMMC, SRAM, eeprom, PLD…etc.
l HDCP Programming Function(Optional)
AH-280 universal programmer meets the requirements of various file formats and also offers an optional HDCP serial programming function.
l CCD Position Module(Optional)
CCD position modules of high pixels for faster coordinates adjusting come as an option.
l Supporting Various IC Packages
Various optional adapters are provided for IC packages such as WLCSP, LQFP, BGA, QFN, TSOP, SOP … etc.
l Absolute Coordinates
Every operation site from the tiniest to the largest is based on absolute coordinates throughout the whole designing, production, and assembly process. This provides the easiest operation with little configuration requirement.
l Automated Marking
Marking modules capable of marking in dot, digits, and letters can be equipped for reel/tape out-put media.
l Flexible Modules to be chosen
AH-280 Universal Programmer series offers easily changeable modules for marker & AOI modules for maximizing productivity in factories.
l Innovative Patent Design
Taiwan Patent No.: M 306360
China Patent No.: ZL2006-2-0137588.6
Japan Patent No.: 3129604
|
|
U.P.H. |
3K(programming time < 8s) |
|
Operation |
Repeatability |
X Axis ±0.02mm R Axis ±0.067 º Z Axis ±0.02mm |
|
Max. Stroke |
X axis 590mm R axis 340º Z axes 28mm |
|
|
IC Pick & Place |
Vacuum Nozzles |
|
|
Device Detection |
Vacuum Sensor |
|
|
Dimension(Main Unit) |
1280x600x1210(W/D/H)mm |
|
|
Dimension with LED Alarm & Packing Modules |
2100x600x1720(W/D/H)mm |
|
|
Weight |
200kg |
|
|
Position System |
Positioning |
Mechanical Offset Correction |
|
Device Size |
30 x 30mm (Max) |
|
|
Programming System |
Built-in Programmer |
Leaper-56 Universal Programmer |
|
Adapter No. |
1~36 |
|
|
PIN Driver |
48 Universal |
|
|
IC Type Packages |
MCU, NAND Flash, NOR Flash, SPI, EEPROM, EPROM, FPGA… |
|
|
IC Packages |
WLCSP, BGA, u-BGA, QFN, LQFP, MLP, SNT, WSON, TSSOP, SSOP, SOP… |
|
|
File Format |
INTEL HEX, MOTOROLA HEX, TEK HEX, ASCII HEX, BINARY…. |
|
|
Communication |
USB 2.0 |
|
|
Input Media |
Tube Input |
150mil, 207mil, 300mil, 330mil |
|
Tube Output |
150mil, 207mil, 300mil, 330mil |
|
|
Tape Input |
Tape Width 12~24mm |
|
|
Tape Output |
Tape Width 8~32mm (Pressure self-sealing) |
|
|
Control System |
OS |
Windows XP embed |
|
Display |
17” LCD |
|
|
Data Input |
Keyboard/Mouse |
|
|
Power |
AC Input |
AC 200V~245V, Single Phase 3-Wire |
|
Frequency |
50/60Hz |
|
|
Power Consumption |
450W |
|
|
Air Pressure |
0.6MPa (~6.0kg/cm2) |
|
|
Air Input |
32 L/Min. |
